White deck railing with black balusters is the trademark of a series of wooden tires made from recycled material. Because they are not made of wood, long-lasting Terex discs are not subject to the same deterioration effects. Terex Trolley System includes rails, which are necessary on tires 30 inches or more above the ground. The Terex rails can be mounted on the tire surface, which requires extra structural support in the design.
Install 2-by-8 blocking during the placement of each post according to the specifications in the rack installation manual available. Use the leveling plate to mark the hole for the posts. Drill these holes with a 3/8 inch drill. Install the white deck railing with black balusters leveling bolts into the bottom of the insert. Set the record on the leveling plate and adjust the bolts until the insert is level. Hold the mounting plate in place while tightening the bolts with a socket wrench to keep the post steady to the deck.
Install a traditional Rail
Cut the upper and lower side strips from 2-of-4 material to fit between the posts. Attach them to the white deck railing with black balusters using L-brackets and composite approved 2 1/2 inch screws. The edges of the best side rails should be at even height with the posts of the posts and the lower edges of the lower side rails should not be more than 4 inches above the ceiling. Cut the top bars from 2 to 6 timers and center these over the best side rails, making sure that the tops of the rails go at the center of service. Screw them down with 2 1/2 “screws.