Although it looks like wood and even contains wood chips and fibers, composite tires are made mainly of plastic – often recycled from other consumer products. It is therefore not the same to install composite boards. Such as installing wood slabs, even though the differences are not good. And before installation the joist, should know about joist distance for composite decking. Although they do not expand and accumulate as much as wooden boards, composite panels have space to move.
You should have a tool that is convenient, such as a 16d spike. These to ensure a uniform joist distance for composite decking of 1/4 inch between them. It is best to start the installation from the wheelbarrow and work towards the house. And tear the last board to fit a table saw if necessary. When the width of the deck exceeds the lengths of the plates and you have to push the boards together, slide the joints as you would when laying a hardwood floor.
This avoids creating the visual distraction of even lines that cuts perpendicularly across the deck and improves stability. Composite panels do not have as much structural stability as wood and require closer spacing to avoid falling. The actual joist distance for composite decking depends on the manufacturer’s recommendations. But it is usually 16 inches, measured from the centers of the lateral beams. The lateral beams must again be properly supported by the beams by means of hinges secured with 1-inch nails or screws.